Sectional garage door opener S26

Designed for customers seeking a standard automatic door opener that offers good value for money - conventional engineering design.

Main functions

Locking door when power failure: An advanced technology with patent. If power failure occurs while the door is opening, the door can be released by pulling the clutch down, then moving the door to the closing position manually, then the door can be locked. By pressing the closing button on the remote when power comes again, the door can be opened while the clutch moves to closing position. After this, normal operation is resumed.

Rolling code: integrated circuit with specialized rolling code. No same code, it is secure.

Auto checking: limited journey can be set just by pressing the remote button twice after installation, when youpress the button the opener will make two round-trips automatically to  set the limited journey . door running resistance will be checked at the same time. After this, the door opener can offer regular service.

Travel memory:  limited journey will be kept in its mind automatically by microcomputer. You don’t need to adjustit again even after the power is failure.  

Soft starting & stopping which can lessen the impacting to the door, and prolong the service life of it, the noise be decreased.

Resistance protection: the opener will check and set the force of the running resistant protection which can ensure the opener has high sensitivity and adapt the running resistance fluctuation automatically even the door is under service for a long time, manual adjustment is unnecessary.

Photo cell protector can be connected with the opener to ensure more protection. There are three work modes for option: forbidden, available or only available when closing.

Auto closing: If the door is forgotten to close, it will be closed automatically after a while. The time can be set for one to nine  minutes. This function is optional.

Burglar Alarm: the opener can be connected with alarm. It will feep in case the door is opened abnormally.

Fault checking: the opener can check the fault and show its code on the LED screen. It is convenient for adjustment and maintenance.

Easy operation: setting parameter will be showed on the LED, easy to be operated.

Accessories
Remote control Two button,rolling code 433.92 MHz	chain rail Accessories (optional)	Outside receiver wall switch Power：9—24V DC Rolling code,channel: 2 Frequency：433.92MHZ Max.Storage:408
wall switch Rolling code,channel: 2 Frequency：433.92MHZ	Key pad Rolling code Frequency：433.92MHZ

Parameter

Parameters		S26/600
power		AC220V±20% 50Hz
Maximum input power		250W
motor		DC 24V
lifting force		600N
Travel limit		Electronic memory
soft start/stop		yes
auto close		0～9min menu setup
automatic bulb off		3min
Lifting height		2.1m,2.4m,2.7m ,3.0m
Drive type		Chain
door travel speed		160mm/s
noise		65dB
Remote control		Rolling code 433.92MHz
Remote distance		≥30m
ambient temperature		-25℃ ~ +50 ℃
Rail		C type steel (Integrated/ sectional)